The Control Panel Menu Structure And Their Associated Entries - Fluke Endurance Series User Manual

ENT

6.2. The control panel menu structure and their associated entries

There are five (5) submenus available via the control panel:
•
•
•
•
•
1.800.561.8187
6.1.5.2. The ENTER Button
The Enter Button confirms the selection of a submenu or a specific submenu
entry. After walking through the listed submenu entries by using the Navigate
Buttons, the selection done by the Enter Button initiates a blinking of the
modifiable entry, displayed in the 2nd row of the Screen/Menu display. To store
updated entries a final press of the Enter Button is needed. With the Enter
Button you also walk through multiple section entries, like network IP-
addresses (4 subfields with a value range of 0-255).
6.1.5.3. The Navigate Up Button
The Navigate Up Button enables you to walk through the list of integrated
entries per submenu, increases marked numerical values or toggles the
specific entry.
6.1.5.4. The Navigate Down Button
The Navigate Down Button enables you to walk through the list of integrated
entries per submenu, decreases marked numerical values or toggles the
specific entry.
INFORMATION MENU (delivers condensed Endurance device information)
CONFIGURATION MENU (display and alteration of configuration settings)
UNIT SETUP MENU (display and alteration of device setups)
INTERFACE MENU (display and alteration of integrated interface setups)
ANALOG MENU (display and alteration of integrated current loop Analog-I/O)
www.
The control panel menu structure and their associated entries
information@itm.com
.com
Device Control
27