3.7
Receiver 10 mm
Tools
•
Torque screwdriver, set to 15Ncm ± 6 %. Bits NTZ 112 1052
•
Blunt pair of tweezers
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 12-26.
#
Figure
1
2
•
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 11-22.
3/000 21-1/FEA 209 544/80 C
Sony Ericsson Mobile Communications AB
Fig.3.7
Fig.3.8
Instruction
1. Remove the camera holder
(with the receiver 10 mm
inside) with a blunt pair of
tweezers or by hand.
(Fig .3.7)
Remove the old receiver 10
mm. Use a blunt pair of
tweezers.
Assemble the new receiver 10
mm in the speaker holder.
(Fig .3.8)
2. Then assemble the unit back
into the frame.
(Fig .3.7)
Working Instruction, SP/Mechanical
Note
Do not touch the contact
pads on the receiver.
20(41)