4.18 Receiver
Replacement Procedure
•
Perform section 2.1-2.4 of the disassembly procedure.
1. Using a pry tool, pry the receiver from its
location in the front cover using the tab on the
side of the receiver as the prying location.
2. Obtain a new receiver and position it in the front
cover's receiver cavity so that the tips of
receiver's spring fingers are pointing towards
the display window.
3. Press the receiver against the front cover to
ensure a good adhesive bond is formed.
NOTE!
•
Perform section 3.6 - 3.9 of the reassembly procedure.
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Avoid pressing on the spring fingers
when applying pressure to the
receiver.
Working Instruction, Mechanical
59(74)