Debugging Ppp { Chap | Compression | Pap | Vjcomp Packet - H3C SecPath Series Command Manual

Command Manual – User Access
H3C SecPath Series Security Products

1.1.2 debugging ppp { chap | compression | pap | vjcomp packet }

Syntax
debugging ppp { chap { all | event | error | packet | state } | compression iphc { rtp
| tcp } | pap { all | event | error | packet | state } | vjcomp packet } [ interface
interface-type interface-number ]
undo debugging ppp { chap { all | event | error | packet | state }| compression iphc
{ rtp | tcp } | pap { all | event | error | packet | state }| vjcomp packet } [ interface
interface-type interface-number ]
View
User view
Parameter
chap: Enable PPP CHAP authentication debugging.
compression iphc rtp: Enable IP/UDP/RTP header compression debugging.
compression iphc tcp: Enable IP/TCP header compression debugging.
pap: Enable PPP PAP authentication debugging.
vjcomp packet: Enable PPP VJCOMP packet debugging.
all: Enable all debugging switches.
event: Enable event information debugging.
error: Enable error information debugging.
packet: Enable packet information debugging.
state: Enable state information debugging.
interface interface-type interface-number: Interface type and interface number.
Description
Use the debugging ppp { chap | compression | pap | vjcomp packet } command to
enable the CHAP, COMPRESSION, PAP, or VJCOMP debugging of PPP.
Use the undo debugging ppp { chap | compression | pap | vjcomp packet }
command to restore the default debugging setting of CHAP, COMPRESSION, PAP or
VJCOMP.
By default, all PPP debugging switches are disabled.
Example
None
Chapter 1 PPP Configuration Commands
1-2