Command Manual – User Access
H3C SecPath Series Security Products
Description
Use the debugging ppp compression iphc rtp command to view the single packet
information of the RTP header compression.
Use the undo debugging ppp compression iphc rtp command to disable
IP/UDP/RTP header debugging in IP header compression.
Example
# Enable IP/UDP/RTP header error debugging of IP header compression.
<H3C> debugging ppp compression iphc rtp error
1.2.2 debugging ppp compression iphc tcp
Syntax
debugging ppp compression iphc tcp { all | context_state | error | full_header |
general_info }
undo debugging ppp compression iphc tcp { all | context_state | error |
full_header | general_info }
View
User view
Parameter
all: Enables all IPHC TCP debugging.
context_state: Enables IPHC TCP context_state packet debugging.
error: Enables IPHC TCP error debugging.
full_header: Enables IPHC TCP full_header debugging.
general_info: Enables general IPHC TCP debugging.
Description
Use the debugging ppp compression iphc tcp command to view the single packet
information of the IP/TCP header compression.
Use the undo debugging ppp compression iphc tcp command to disable IP/TCP
header debugging in IP header compression.
Example
# Enable IP/TCP header error debugging of IP header compression.
<H3C> debugging ppp compression iphc tcp error
Chapter 1 PPP Configuration Commands
1-14
Need help?
Do you have a question about the SecPath Series and is the answer not in the manual?