Dialer Bundle - H3C SecPath Series Command Manual

Command Manual – User Access
H3C SecPath Series Security Products
Parameter
None
Description
Use the dialer enable-circular command to enable Circular DCC.
Use the undo dialer enable-circular command to disable Circular DCC.
By default, Circular DCC is enabled on the ISDN interfaces and disabled on other
interfaces.
You must use this command to enable it before using Circular DCC.
Example
# Enable Circular DCC on Dialer 1.
[H3C-Dialer1] dialer enable-circular

3.1.3 dialer bundle

Syntax
dialer bundle number
undo dialer bundle
View
Dialer interface view
Parameter
number: Number of dialer bundle, ranging from 1 to 255.
Description
Use the dialer bundle command to configure a dialer bundle used by a dialer interface.
Use the undo dialer bundle command to disassociate the dialer bundle from the dialer
interface.
By default, the Resource-Shared DCC is not enabled, neither is dialer bundle specified.
This command can be applied only on a dialer interface. Furthermore, a dialer interface
can only use a dialer bundle.
Example
# Configure the interface Dialer1 to use dialer bundle3.
[H3C-Dialer1] dialer bundle 3
Chapter 3 PPPoE Client Configuration Commands
3-2