Reset Ppp Compression Stac-Lzs - H3C SecPath Series Command Manual
User access, security products
Hide thumbs
Also See for SecPath Series:
- Operation manual (41 pages) ,
- Command reference manual (27 pages)
Table of Contents
Advertisement
Command Manual – User Access
H3C SecPath Series Security Products
If no parameter is specified, the storage table entries of IP header compression on all
interfaces will be cleared.
Example
# clear the statistics about the IP/UDP/RTP header compression.
<H3C> reset ppp compression iphc
1.2.12 reset ppp compression stac-lzs
Syntax
reset ppp compression stac-lzs [ interface-type interface-number ]
View
User view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the reset ppp compression stac-lzs command to clear statistics about
STAC-LZS compression.
If no interface is specified, statistics about STAC-LZS compression on all interfaces is
cleared.
Example
# Clear statistics about STAC-LZS on all the interfaces.
<H3C> reset ppp compression stac-lzs
Chapter 1 PPP Configuration Commands
1-21
Advertisement
Table of Contents
Need help?
Do you have a question about the SecPath Series and is the answer not in the manual?