Reset Vlan Statistics Vid; Vlan-Type Dot1Q - H3C SecPath Series Command Manual

Command Manual – User Access
H3C SecPath Series Security Products
Description
Use the max-packet-process command to set the maximum number of packets
processed per second on a certain VLAN.
Use the undo max-packet-process command to restore the default setting.
By default, the system has no limitation of the maximum number of processed packets.
After setting the maximum number of processed packets per second on a certain VLAN,
and the received packet number belonging to this VLAN reaches the limitation, the
subsequently received packets belonging to the VLAN will be discarded. Through this
command, you can perform flow control.
Related command: display vlan max-packet-process.
Example
# Set the maximum number of packets processed per second on VLAN 10 to 200000.
[H3C] max-packet-process 200000 10

4.1.5 reset vlan statistics vid

Syntax
reset vlan statistics vid vid
View
User view
Parameter
vid: VLAN ID, used to identify a VLAN.
Description
Use the reset vlan statistics vid command to clear the VLAN statistics.
Related command: display vlan statistics vid.
Example
# Clear the statistics with VLAN ID 10.
<H3C> reset vlan statistics vid 10

4.1.6 vlan-type dot1q

Syntax
vlan-type dot1q vid vid
Chapter 4 VLAN Configuration Commands
4-3