Command Manual – User Access
H3C SecPath Series Security Products
Chapter 1 PPP Configuration Commands
1.1 PPP Configuration Commands
1.1.1 debugging ppp { all | cbcp | ccp | scp }
Syntax
debugging ppp { all | cbcp packet | ccp { all | event | error | packet | state } | scp
packet } [ interface interface-type interface-number ]
undo debugging ppp { all | cbcp packet | ccp { all | event | error | packet | state } |
scp packet } [ interface interface-type interface-number ]
View
User view
Parameter
cbcp packet: Enable CBCP packet debugging.
scp packet: Enable SCP packet debugging.
ccp: Enable CCP debugging.
all: Enable all debugging switches.
event: Enable event information debugging.
error: Enable error information debugging.
packet: Enable packet information debugging.
state: Enable state information debugging.
interface interface-type interface-number : Interface type and interface number.
Description
Use the debugging ppp { all | cbcp | ccp | scp } command to enable the CBCP, CCP,
SCP, or all debugging switches.
Use the undo debugging ppp { all | cbcp | ccp | scp } command to restore the default
debugging setting.
By default, all PPP debugging switches are disabled.
Example
None
Chapter 1 PPP Configuration Commands
1-1