Page 1
H3C SecPath Firewall Network Data Encryption Modules Manual New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W101-20201210...
Page 2
The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
Page 3
Preface This manual describes the specifications and installation procedure for the network data encryption modules. This preface includes the following topics about the documentation: • Audience. • Conventions. • Documentation feedback. Audience This documentation is intended for: • Network planners. •...
Page 4
Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information.
Page 5
Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
About the encryption modules The NSQM1F1KGM0, NSQM1F5KGM0, NSQM1F1KGMB, NSQM1F1KGMC, NSQM1F5KGMC, NS-HTIM-GMG2A, and NS-HTIM-GMG2B are network data encryption modules developed by H3C. The encryption modules provide the following functionalities: • Support rapid generation of random numbers, SM1 fast grouping algorithm, and SM2 public key encryption algorithm.
Page 8
Figure 4 NSQM1F5KGM0 (1) Captive screw (2) Ejector lever (3) LED (READY) Figure 5 NSQM1F5KGMC (1) Captive screw (2) Ejector lever (3) LED (READY) Figure 6 NS-HTIM-GMG2A (1) Captive screw (2) LED (READY) (3) Ejector lever Figure 7 NS-HTIM-GMG2B (1) Captive screw (2) LED (READY) (3) Ejector lever...
NS-HTIM-GMG2B Table 9 Compatible hardware and software for the NS-HTIM-GMG2B encryption module Compatible firewalls Compatible slots Software version • F5030-D, F5060-D, F5080-D Slots 2/1 E9620 or higher • F5000-AK515, F5000-AK525 Installing the encryption modules No encryption modules are provided with the device. Purchase them as needed. Installing an NSQM1F1KGM0 encryption module An NSQM1F1KGM0 encryption module is 1U high and occupies two interface module slots.
Figure 9 Installing an NSQM1F1KGM0 encryption module Installing an NSQM1F1KGMB or NSQM1F1KGMC encryption module The installation procedure is similar for the NSQM1F1KGMB and NSQM1F1KGMC encryption modules. The following procedure installs an NSQM1F1KGMB encryption module. To install an NSQM1F1KGMB encryption module: Face the rear panel of the device and identify the target slot.
Figure 11 Installing an NSQM1F1KGMB encryption module Installing an NSQM1F5KGM0 or NSQM1F5KGMC encryption module The installation procedure is similar for the NSQM1F5KGM0 and NSQM1F5KGMC encryption modules. The following procedure installs an NSQM1F5KGM0 encryption module. To install an NSQM1F5KGM0 encryption module: Face the rear panel of the device and identify the target slot.
Installing an NS-HTIM-GMG2A or NS-HTIM-GMG2B encryption module The NS-HTIM-GMG2A and NS-HTIM-GMG2B encryption modules are 1U high and each occupies two interface module slots. They use the same installation procedure. The following procedure installs an NS-HTIM-GMG2A encryption module. To install an NS-HTIM-GMG2A encryption module: Face the rear panel of the device and identify the target slots.
• Create a digital envelope based on the SM2/RSA encryption algorithm. • Generate random number sequences on the physical noise generator chip approved by the China's State Cryptography Administration (SCA). • Provide user access control and management to improve device security. •...
Need help?
Do you have a question about the SecPath NSQM1F1KGM0 and is the answer not in the manual?
Questions and answers