Command Manual – User Access
H3C SecPath Series Security Products
Parameter
password: Password.
simple, cipher: Passwords in plain text or in encrypted text.
Description
Use the ppp chap password command to configure the default CHAP password while
performing CHAP authentication.
Use the undo ppp chap password command to cancel the configuration.
While configuring CHAP authentication, you should configure the local password to be
the same as the user password at the other end.
Related command: ppp authentication-mode chap, local-user.
Example
# Set the user password for the local firewall to be authenticated in CHAP mode to
mypwd in plain text.
[H3C-Virtual-Template1] ppp chap password simple mypwd
1.1.7 ppp chap user
Syntax
ppp chap user username
undo ppp chap user
View
Interface view
Parameter
username: User name of CHAP authentication, which is the one sent to the peer
equipment to be authenticated. username is a string of 1 to 80 characters.
Description
Use the ppp chap user command to configure the user name when performing the
CHAP authentication.
Use the undo ppp chap user command to delete the existing configuration.
While configuring CHAP authentication, you should configure the username of each
end as the local-user of the peer end, and configure the corresponding password
accordingly.
Related command: ppp authentication-mode, local-user.
Chapter 1 PPP Configuration Commands
1-6
Need help?
Do you have a question about the SecPath Series and is the answer not in the manual?