Command Manual – User Access
H3C SecPath Series Security Products
# View the statistics information of PPPoE session.
<H3C> display pppoe-server session packet
SID
RemMAC
1
0050ba1a02ce 0001af02a40f
Table 2-2 Description of the output
Field
InP
InO
InD
OutP
OutO
OutD
2.1.2 pppoe-server bind virtual-template
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
View
Interface view
Parameter
number: Number of the virtual-template for access to PPPoE, and its value ranges from
0 to 1023.
Description
Use the pppoe-server bind virtual-template command to enable PPPoE on the
virtual-template specified by the Ethernet interface.
Use the undo pppoe-server bind command to disable PPPoE protocol on the
relevant interface.
By default, PPPoE protocol is disabled.
Related command: link-protocol ppp.
Example
# Enable PPPoE on virtual-template 1 of Ethernet interface Ethernet1/0/0.
[H3C-Ethernet1/0/0] pppoe-server bind virtual-template 1
Chapter 2 PPPoE Server Configuration Commands
LocMAC
InP
42
In Packets, Packages received
In Octets, Bytes received
In Discards, Received and then discarded packages
Out Packets, Packages sent
Out Octets, Bytes sent
Out Discard, Discarded packages that might be sent.
2-2
InO
InD
OutP
2980
0
16
Description
OutO
OutD
343
0
Need help?
Do you have a question about the SecPath Series and is the answer not in the manual?