Using Toll Restriction Override - Comdial DSU and DSU II System Reference Manual

GCA70–245

8.19 Using Toll Restriction Override

You can override one station's toll restriction assignment by dialing a
programmed four-digit TRO code at another station prior to dialing
your desired number. When you do this, the system replaces the toll
restriction requirements of the station that you are using with those that
match your home station. After entering a TRO code at another station,
you will get your own prime line or idle line preference and its
accompanying toll restriction assignment. You then have 15 seconds to
dial an outgoing call. Once you have hung up from a call, you have 15
seconds to make another call without re-entering your TRO code. If
you transfer a TRO call or place it on hold and pick it up at another
station, the call belongs to the new station.
To use TRO at a station,
1. Press INTERCOM,
2. Dial 6.
3. Dial your station extension number.
4. Dial your TRO code number (TRO code is not displayed— instead
an is shown).
5. Within 15 second timeout period, dial desired outgoing line
number.
6. Hang up handset or press SPEAKER to end call. You will have 15
seconds in which you can make another call without
re-entering your TRO code.
To clear the TRO code,
1. Press INTERCOM,
2. Dial 6,
3. Press SPEAKER.
Using The Other Telephone Features
LCD Speakerphone Reference Manual 8–17