Comdial DSU and DSU II System Reference Manual page 43

GCA70–245
Drop message
— "Thanks for calling Acme, good bye."
Storing DVA messages
1. Press INTERCOM, then dial
2. Choose the message style.
— Dial 1 for DISD message style.
Dial 2 for DCD message style.
3. Select DVA station ports.
4. Dial 10–57 or press C10–C57 (LED On = Selected).
Then press #.
5. Press # to erase all four messages.
6. Dial code for message type you wish to record.
—Dial 5 to record day answer message.
—Dial 6 to record night answer message.
—Dial 7 to record recall message.
—Dial 8 to record drop message.
—Dial 9 to stop recording.
7. Read the message aloud into the telephone handset mouthpiece.
Note the length of time for the message. Remember, the
maximum allowed time for messages is two minutes.
—OR—
—Start the audio tape recorder, and play the pre-recorded message.
8. Press and repeat steps 5–7 for each message.
9. Dial code to listen to your recorded messages.
—Dial 1 to play day answer message.
—Dial 2 to play night answer message.
—Dial 3 to play recall message.
—Dial 4 to play drop message.
—Dial 9 to stop playback.
10. To erase all four messages, press #.
11. To record or play messages for another DVA, press
steps 2–8.
Programming The Attendant Features
# 08.
. . . . Continued on next page
LCD Speakerphone Reference Manual 2–23
and repeat