Lcd Messaging - Comdial DSU and DSU II System Reference Manual

GCA70–245

9.2 LCD Messaging

You can set system-supplied messages to be received or displayed by a
calling LCD speakerphone. These messages give information on your
telephone status. Get a list of the available messages from the attendant
and write them on the blank listing chart on the next page.
To turn message on,
1. Press INTERCOM.
2. Dial 0 2.
3. Dial the desired number from your message list. The default
messages of "Back At" and "Call" may be used:
For default message 1, which is "Back At," dial time in
twelve-hour format using the # as a colon.
For default message 2, which is "Call," dial the telephone number
of where you will be.
4. Press SPEAKER to end message. Intercom light flashes steadily.
To turn off message and your intercom light,
1. Press INTERCOM.
2. Dial # 0 2.
LCD Message List
(Write Attendant-provided messages here)
0
1 Back At
2 Call
3
4
5
6
7
8
9
Using Non-Verbal Messaging
LCD Speakerphone Reference Manual 9–3