Programming Your Telephone; Programming For Automatic Dialing - Comdial DSU and DSU II System Reference Manual

GCA70–245
10

10.1 Programming For Automatic Dialing

Automatic dialing is a feature that lets you:
dial lengthy numbers using one or two buttons,
store frequently used feature codes,
store intercom extension numbers of frequently called
telephones.
You can store numbers for automatic dialing at the
following locations:
at any programmable button that is not now assigned as a line
button or other feature by the system administrator or installer,
on a secondary level under a DSS button (however, you cannot
store a number in place of a DSS stored there),
at the keypad numbers 0-9.

Programming Your Telephone

Programming
Your Telephone
LCD Speakerphone Reference Manual 10–1