Programming Your Telephone; Storing Speed Dial Numbers - Comdial DXP User Manual

GCA70–251
9
Programming
Your Telephone
9.1

Storing Speed Dial Numbers

To store an outside number as a speed dial number,
1. Lift handset and listen for intercom dial tone.
2. Dial 1.
3. Dial 0–9 to choose storage location.
4. Dial 01–16 to select line groups 1–16, or dial 00 to let system
select line.
5. Dial number to be stored (up to 16 digits long—include
# if needed). To store hookflash in a number sequence, press
TAP; press HOLD to store pause (only if needed).
6. Press TRANSFER/CONFERENCE to store number.
7. To store another number, repeat steps 4 through 7.
8. Repeat previous steps until all numbers are stored.
9. Hang up handset to end.
NOTE: The Federal Communications Commission (FCC) requires
that when programming emergency numbers and making test
calls to emergency numbers, you do the following: (1) Remain
on the line and briefly explain to the dispatcher the reason for
the call; (2) always make such a test call during the off-peak
hours, such as early morning or late evening.
Single Line Telephone Station User's Guide 9 – 1

Programming Your Telephone

and