Automatic Set Relocation - Comdial Impact 8012S Series User Manual

Other Advanced Features

Automatic Set Relocation

If your installer has equipped your system with automatic set relocation, when you
move your telephone to a new location, the system gives you a choice (through a
display prompt) as to whether you want to keep your previous programming or use
the programming in the new location.
•
To maintain the extension number and programming features
from the old location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND PRESS HOLD while the
light is still flashing (your telephone immediately assumed the
features from the previous location).
NOTE: If you do not select a button after installing the telephone, the system
automatically defaults to the programming from the previous location.
•
To assume the extension number and programming features
from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND DIAL
light is still flashing (your telephone immediately assumes the
features from the new location).
76
#
LCD Speakerphone Station User's Guide
GCA70-258
while the