Huvitz Excelon EZ Operator's Manual page 65

• Check input value : use value range check feature or not
• Edger<->Tracer job sync : use job sync feature or not
• Job sync interval(seconds) : default interval value of job sync feature
(seconds)
• Disable down key at last menu item : Lock [DOWN] key at last menu item
• Show menu input range : show range of the menu item value
• Show menu input step : show step value of the menu item
• Max digital pattern width : Maximum width of digital-patterned lens (mm)
• Max digital pattern height : Maximum height of digital-patterned lens
(mm)
• Use beep : use beep or not
• Beep settings : setup beep options in detail
• Screen adjustment : adjustment LCD screen position
• There are many options in the edger menu not described in this manual.
• Be sure to only change options described in this manual.
• Others, it may cause malfunction of the product.
Excelon EZ Operator's Manual
! NOTE
65