Gui Customize - Huvitz Excelon EZ Operator's Manual

Excelon EZ Operator's Manual
64

6.2.6 GUI Customize

Setup the interface of the GUI screen in detail.
• Input step : setup step value (mm)
• Increase/Decrease minimum value : use minimum step value or not
• Separate R/L OH : apply OH value only to selected side or not
• Check password once : check password once or not
• Show original frame : show original frame shape when digitial pattern
used
• Blocking both sides : sending both sides data when blocking
• Show boxing center blocking offset : display blocking offset for Excelon
manual blocker
• Disable blocking warning message : didn't show blocking warning message
• Refresh screen immediately : screen redrawn whenever layout option
changed
• Screen refresh delay : default delay time of screen refresh (seconds)
• Digital pattern delay time : default delay time of digital pattern
feature (seconds)
• Wheel check interval(minutes) : default value of test of wheel counter
(minutes)
• Screen saver wait(minutes) : default value of screen saver interval
(minutes)