Huvitz Excelon EZ Operator's Manual page 15

• Do not disassemble the product without the proper training. It may cause the
electric shock, serious hurt during the operation or cause the malfunction of the
product.
• Be sure the material of lens is matched with the job options selected in the
display before starting the edging mode. Otherwise, it may cause the damage
to the wheel and shorten the lifetime of wheel.
• The safety beveling for glass lenses should be performed both at front and rear
side. Otherwise, it will cause the damage to the human skin.
• The product should be properly installed and maintained at the horizontally
leveled place. Otherwise, it may affect the normal operation of the product.
• Do not force on the stylus of frame reader. It may cause the malfunction of the
product.
• Be sure that the stylus of frame reader is not interfered with the human body or
other objects during the operation.
malfunction of the product.
• Be sure that the fingers are not caught during clamping.
• In case of detaching the lens adapter from the finished lens, use the Adapter
Remover supplied as the standard accessory. Do not pull out the lens adapter
with bare hands.
• Be sure that the water supply hose is not folded or interfered with other objects
causing the problem of water supply. It may deteriorate the quality of lens
finishing. The debris of lens may cause the damage to the respiratory organ of
operator and malfunction of the product.
Excelon EZ Operator's Manual
!
WARNING
Otherwise, it may cause the hurt or
15