Recording Each Channel Individually (Realtime Recording) - Yamaha Genos Reference Manual

Recording Each Channel Individually (Realtime Recording)

With MIDI Recording, you can create a MIDI Song consisting of 16 channels by recording your performance to each
channel one by one. In recording a piano piece, for example, you can record the right-hand part to channel 1 then
record the left-hand part to channel 2, allowing you create a complete piece which may be difficult to play live with
both hands together. To record a performance with Style playback, for example, record the Style playback to channels
9–16, then record melodies to channel 1 while listening to the already recorded Style playback. In this way, you can
create an entire Song which would otherwise be difficult, or even impossible, to play live.
1
Call up the MIDI Multi Recording display via [RECORDING]  MIDI [Multi Recording].
A blank Song for recording is automatically set, and the Song name on the Multi Recording display is set to "New
Song."
2
3
2
If you want to re-record an existing Song, select the desired Song by touching the Song
name, and then press the [EXIT] button to return to the Multi Recording display.
If you want to record from scratch, skip this step.
3
Touch the instrument icon of the target channel to call up the
part setting window, and then specify the part for recording.
Touching [OK] automatically turns [Rec] on of the target channel, and sets it to
recording standby status.
If you want to turn the other channels on or off while recording, touch the channel number of the desired channel.
NEXT PAGE
NOTICE
Previously recorded data will be
overwritten if you set [Rec] to on
for those channels which already
have recorded data.
NOTE
If you want to cancel recording, touch
[] (Rec) in the display before going on
to step 4, then press the [EXIT] button to
exit from the Recording mode.
Genos Reference Manual
5
69