Battery Pack And Charger - LawnMaster CLGT2412S Operator's Manual

BATTERY PACK AND CHARGER

BATTERY CHARGING
1. Use only with 24V LawnMaster
designed for the lithium-ion battery used in this tool.
2. Check the power voltage! Battery chargers operate on 120V.
3. The battery is charged between 40°F (4°C) and 100°F (38°C). This ensures an optimum battery
service life.
4. Protect the battery from heat, from continuous exposure to sun, and keep away from radiation or
other heat sources. Do not leave the battery in the tool in direct sunlight over long periods.
5. The battery is supplied partially charged. To ensure full capacity of the battery, charge the battery
reducing its service life. Interrupting the charging procedure does not affect the battery.
LED CHARGER STATUS
1. If the battery is not inserted into the charger, a continuous red LED light indicates that the charger is
plugged into a power supply socket and is now ready to begin charging.
2. Charging:
3. Charged: Continuous green LED on the charger indicates that the battery is ready for use.
The indicator lights on the charger show the charger status:
SYMBOL
4. The intelligent charger ensures maximum battery life, because it measures the existing charge level of the
5.
problem or might be defective.
a) One possible condition is the battery temperature is not within the charging temperature range of 40°F
(4°C) and 100°F (38°C). As soon as the permitted temperature is reached, the battery charger will
automatically switch to charging.
®
on the charger indicates that the battery is charging normally.
INDICATOR LIGHTS
Red, blinking
Red, continuous
Green, blinking
Green,
continuous
light on the charger indicates that battery pack has a charging
16
STATUS
Charging paused. See
Technical Issue.
Connected to power supply.
Charging.
Fully charged.