Environmental Specifications; Table 1-3: Environmental Specifications - Aerotech AGV-HP Series Hardware Manual

1.1. Environmental Specifications

1.1. Environmental Specifications
W A R N I N G : Do not expose this product to environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to the
equipment.
Table 1-3: Environmental Specifications
Ambient
Temperature
Humidity
Altitude
Vibration
Protection
Rating
Use
16
The optimal operating temperature is 20° C ±2° C (68° F ±4° F). If at any time the
operating temperature deviates from 20° C degradation in performance could occur.
Storage: 0° to 40° C (32° to 104° F) in original shipping packaging
Operating: 20% to 60% RH
Storage: 10% to 70% RH, non-condensing in original packaging. The stage should be
packaged with desiccant if it is to be stored for an extended time.
Operating: 0 m to 2,000 m (0 ft to 6,562 ft) above sea level
Contact Aerotech if your specific application involves use above 2,000 m or below sea
level.
Use the system in a low vibration environment. Excessive floor or acoustical vibration
can affect system performance. Contact Aerotech for information regarding your
specific application.
The AGV-HP(O) has some protection from contamination due to laser marking and
cutting processes. However, the scan head is not sealed. Dust and fumes generated
by the laser machining process should be removed via an adequate exhaust or vacuum
system. Failure to control this debris could result in damage to the scan head and the
focal lens.
Indoor use only
AGV-HP(O) Hardware Manual
www.aerotech.com