Table of Contents
Advertisement
Detected Video Format
Video Rate1
Actual Bit Rate
Actual Frames per
Second
Total Frames
Frames Processed
Buffer Full Count
Audio
How is Audio Connected
Audio State
Detected Audio Frequency Indicates the actual audio frequency. This field is shown only
Audio Rate1
Actual Bit Rate
Total Frames
Frames Processed
Buffer Full Count
System Logs
System logs can give you more information about the status of your appliance. Each log can
hold up to 20 of the latest informational messages. All logs are emptied when the appliance is
powered down or reset.
62
SDI or HDMI only. Indicates what is actually connected. This is
useful for determining configuration mismatches.
Measured rate in bits per second of the encoded video stream being
created by the appliance.
Measured rate in frames per second of the encoded video stream
being created by the appliance. This rate is rounded down and may
indicate 0 for frame rates less than 1 per second.
Total video frames received from connected video source.
Total video frames encoded and streamed by the appliance.
Increments when the appliance is in an overloaded condition. Reduce
the load by lowering bit rates or reducing the number of RTSP and/or
HTTP clients.
Shows audio connection type from Audio/Video
Configuration > Audio page.
Only audio from SDI or HDMI inputs can be monitored.
Audio from the Main or Aux inputs is not monitored and will
not generate an alarm.
• Running – no audio problems detected.
• Digital Audio Input Problem – audio connection is not
OK.
for HDMI input configured with digital audio.
Measured rate in bits per second of the encoded audio stream being
created by the appliance.
Total audio frames received from connected video source.
Total audio frames encoded and streamed by the appliance.
Increments when the appliance is in an overloaded condition. Reduce
the load by lowering bit rates or reducing the number of RTSP and/or
HTTP clients.
© 2009 VBrick Systems, Inc.
Advertisement
Table of Contents
