Table of Contents
Advertisement
Log Time Zone
Trap Log Local
Trap Log Remote
General Config Log
Local
General Config Log
Remote
Script Config
Log Local
Script Config
Log Remote
System Event Log
Local
System Event Log
Remote
Remote Event Log
Destination
Event Triggering
You can create and run scripts to activate certain functions on a VBrick appliance. There are
two ways to run scripts on an appliance. (1) You can run scripts for test purposes using the
VBrick H.264 Appliance Admin Guide
Determines the time zone where the unit is located. The time which
is included in the logged event displays time in this format.
Stores logs locally within the unit. The log file will wrap after 20
events.
Sends log file to an external server.
Stores the log of user initiated configuration changes traps locally
within the unit. The log file will wrap after 20 events.
Sends the log of user initiated configuration changes to an external
server.
Stores the log of script generated configuration changes locally
within the unit. The log file will wrap after 20 events.
Sends the log of the log of script generated configuration changes to
an external server.
Stores the log of system events locally within the unit. The log file
will wrap after 20 events.
Logs systems events to an external server.
Unicast IP address of remote event log server.
System Configuration
23
Advertisement
Table of Contents
