Table of Contents
Advertisement
Number of Programs
Available
Maximum RTSP Clients
Maximum RTSP Bandwidth 0–1000000000. Default = 20000000.
Announce IP Address for
Transmitters
Announce IP Address for
Servers
Announce Port
Announce Transmit Interval 1–9999. Default = 10. Determines how often the
Announce IP Multicast TTL 1–255. Default = 64
Announce IP Unicast TTL
Announce IP TOS
Table 7. TOS Settings
Priority Level
111
110
101
100
011
010
001
000
Bit 3
Bit 4
Bit 5
44
Read-only. This release supports one program.
0–202. Default = 200.
Default IP address to which transmitter announcements are
sent. This global announcement IP address is inherited by all
other transmitters. Default = 224.2.127.254.
Default IP address to which server announcements are sent.
This global announcement IP address is inherited by all
other servers. Default = 255.255.255.255.
Default = 9875
announcement is transmitted.
1–255. Default = 64.
Type of Service settings control the level of priority a service
or source receives while traveling through a network. VBrick
supports setting the IP TOS (Type of Service) in accordance
with RFC-791, RFC-1112 and RFC-2474 (Differentiated
Services Field in the IPv4 Header). You can set the Type of
Service field in the IP header to any value, decimal 0 to 255.
See Table 7 below. Default = 0.
Type of Service
Network Control
Internetwork Control
CRITIC/ECP
Flash override
Flash
Immediate
Priority
Routine
0 = Normal delay
1 = Low delay
0 = Normal throughput
1 = High throughput
0 = Normal reliability
1 = High reliability
© 2009 VBrick Systems, Inc.
Advertisement
Table of Contents
