Table of Contents
Advertisement
Click Here to Play Stream
Choose Server to Configure Select from dropdown list. The number of servers is
Enable Server
Server Name
Select Video Rate
Select Audio Rate
Estimated Bit Rate
Resource Name
Stream URL
RTCP Transmit
54
Edit Mode/Read-only. Shown in Edit mode only if the server
is enabled. Click once to launch the stream in the QuickTime
plugin (using the SDP file). This link will work only with
QuickTime 7.0 or higher. If QuickTime is not installed, you will
be prompted to download the application from Apple.
configured on the Program Configuration > Programs page.
Check to enable the server. Default = enabled. The server
must be enabled for streaming to occur
User-defined name for this server.
Select video rate (defined on Audio/Video Configuration >
Video page) from dropdown list.
Select audio rate (defined on Audio/Video Configuration >
Audio page) from dropdown list.
Read-only. This is an estimate. The actual bit rate will vary
based on the content.
Defines the server URL. Default =
the program number and
Read-only. Use this URL in QuickTime or VLC to view the
stream via RTSP.
Enable allows RTCP sender reports to be sent from the
VBrick appliance. Default = Enable.
where
vbStreamXSY
is the server number.
Y
© 2009 VBrick Systems, Inc.
is
X
Advertisement
Table of Contents
