Table of Contents
Advertisement
External SSH Server
No Login For Viewer
Files
Remote Support Poll
Remote Support
Server
RTSP Server Port
VBAdmin Server Port
Secure VBAdmin
Server Port
H.264 Tunneling Port
VBrick H.264 Appliance Admin Guide
Default = Enabled. SSH (Secure Shell) is a replacement for Telnet.
It allows data to pass between two networked devices using a
secure channel.
Default = Enabled. If enabled the VBrick will serve a transmitter's
SDP file without requiring a login with username and password.
This allows any device (players, decoders, etc.) to acquire the SDP
file directly from the appliance. If disabled you may need to
provide another method for delivering the SDP file to the
receiving device, such as copying the file to another server.
Default = Disabled. The default enables continuous polling
through the firewall. If desired, you can enable polling only when
you need to establish a remote connection. This will not reboot the
appliance.
Default =
remote.vbrick.com
defined on the Network page. If a DNS server is not defined, you
must enter an IP Address in this field. Contact Support Services
for details.
Default = 554. Sets the RTSP server port.
Specifies the listener port for management and HTTP
connections. Default = 80. When the remote VBAdmin user
(client) specifies the http syntax, the port value is generally
omitted. Typically port 80 is the default value used by browsers.
As a matter of consistency, the VBrick default VBAdmin Server
Port value is also defaulted to 80. To access a different HTTP
port, the remote VBAdmin client user would specify the URL as
follows:
http://IPaddress:port
address or hostname, and port. This feature is often useful for a
system where HTTP is used to traverse firewalls. The VBAdmin
server port is moved to another location (for example 8080) and
the HTTP Tunneling port (or the Windows Media HTTP port) is
set to 80.
Specifies the listener port for management and HTTPS
connections. Default = 443. When the remote VBAdmin user
(client) specifies the HTTPS syntax, the port value is generally
omitted. Typically port 443 is the default value used by browsers.
As a matter of consistency, the VBrick default Secure VBAdmin
Server Port value is also defaulted to 443. To access a different
HTTPS port, the remote VBAdmin client user would specify the
URL as follows:
https://IPaddress:port
IP address or hostname, and port.
Sets the port to be used to serve tunneled H.264 HTTP streams.
Default is 8080 but if you are streaming HTTP directly from a
VBrick via the Internet, it is common practice to change this to 80
and to set the VBAdmin server port to something other than 80.
System Configuration
. Use the default if a DNS server is
where
= VBrick IP
IPaddress
where
IPaddress
= VBrick
21
Advertisement
Table of Contents
