System Time; System Mode; System Reset; Front Panel - VBrick Systems 7000 Series Admin Manual

System Time

System Date Time
Time Zone
Daylight Saving Time U.S. only. Check this box and the appliance will automatically adjust

System Mode

Operational Mode

System Reset

Reset

Front Panel

The parameters shown here are used to configure the appearance and behavior of the front
panel. Access to front panel Configuration Mode is restricted by Pin number. Pin numbers
(default = ) are defined on the Usernames & Passwords page. Some VBrick H.264
0000
appliance models have a front panel without keypad buttons or an LCD screen. If you have
one of these devices, the front panel configuration parameters shown below are not displayed.
For a description of how to actually use the front panel, see the "Front Panel" topic in the
H.264 Appliance Getting Started Guide.
VBrick H.264 Appliance Admin Guide
Sets system date and time in
appliance will reset when you click Set Time.
Select from list: (GMT-12) Eniwetok – (GMT +12) Auckland.
for Daylight Savings Time. This is particularly useful when
monitoring the System Logs.
Indicates the configured operational mode of the appliance. The
following modes are supported:
• Run Mode – Normal operation.
• Diagnostics – User selected mode for running certain VBrick
diagnostics. See Troubleshoot on page 69.
Resets (i.e. reboots) the appliance. A reset does not change, save, or
reset any configuration parameters.
System Configuration
format. The
mm/dd/yyyy hh:mm
11