Audio - VBrick Systems 7000 Series Admin Manual

Network video appliances
Table of Contents

Advertisement

 
176x128
 
128x96

Audio

The audio circuit on the H.264 encoder uses mixed signal technology (a combination of
analog and digital signals). The encoder has two audio input connectors labeled
. The input signals can be either balanced or unbalanced and each has a usable voltage
Aux
range up to 10 dbU. Various channel configurations and bit rates can be set on the Audio/
Video Configuration > Audio page. The encoder provides controls for mic level vs. line level
balanced mode support, input gain/attenuation, automatic level controls, and other advanced
audio features. The encoder supports three types of electret microphones:
Electret Condenser, battery operated or plug-in power (SoundBlaster style)
Dynamic type balanced or unbalanced
Externally-powered phantom types and otherwise amplified types such as wireless.
The microphone input is automatically boosted by a pre amplifier. The pre-amplifier
provides a selectable 16 or 32 db of gain (boost). Various configuration parameters control
how the input signals are conditioned as well as how the resultant audio is compressed. The
audio input signal parameters define how audio is connected, what the signal ranges are, the
style of electrical interfaces, and the number of channels connected to the device. Audio
encoder parameters define how the audio will be compressed and are used to control the bit
rate. The bit rate directly affects the audio quality levels and determines the range of audio
content that can be handled.
38
192x144
176x144
128x96
128x96
256x144
 
 
and
Main
© 2009 VBrick Systems, Inc.

Advertisement

Table of Contents
loading

Related Products for VBrick Systems 7000 Series

Table of Contents