Table of Contents
Advertisement
Figure 8. Transmitters: Part 1 – Standard Settings
SDP File URL
Choose Transmitter to Configure Select from dropdown list. The number of transmitters
Enable Transmitter
Transmitter Name
Select Video Rate
Select Audio Rate
50
Click to play (open) or save the .sdp file. The .sdp file is
retrieved via the HTTP server on the appliance. Paste
this URL into a browser to launch the stream "out-of-
band" using the .sdp file.
The URL address for the .sdp file is based on the
program and transmitter number, for example:
AAA.BBB.CCC.DDD/vbStreamXdY.sdp
program number,
is the transmitter number and
Y
is appliance IP address.
AAA.BBB.CCC.DDD
is configured on the Program Configuration > Programs
page.
Use to individually disable a transmitter. Default =
Disabled. The transmitter must be enabled for streaming
to occur.
Enter an optional user-friendly name that describes the
transmitter.
Select from dropdown list: Video Rate1 or None.
Select from dropdown list: Audio Rate 1 or None.
http://
where:
is the
X
© 2009 VBrick Systems, Inc.
Advertisement
Table of Contents
