Table of Contents
Advertisement
Read or Write Script
Files
User Function Script
1–4
Usernames & Passwords
Use this page to define user names and passwords and their corresponding permissions with
respect to the appliance. (Table 2 shows the default user names, passwords, and permissions.)
It also lets you assign a Pin number that will allow direct access to the keypad and functions
on the appliance front panel (if the appliance is configured with a front panel.
User Name
Password
Confirm
Pin
Confirm Pin
VBrick H.264 Appliance Admin Guide
You can add scripts to the
by clicking on the
FTP Scripts
Use this parameter to associate a user-defined and user-named .txt
script file with (F1–F4) function keys on the front panel. Simply
press the appropriate function key to execute the script. For an
example of a user-defined script, see Sample Script on page 17.
Enter desired user name. Cannot exceed 20 characters. It may include
any combination of alphanumeric characters and only the following
special characters:
~ ! # $ ^ * + & [ ] { } | < >
defaults.
Enter password. Cannot exceed 20 characters. May include any
combination of alphanumeric characters but only the following special
characters:
~ ! # $ ^ * + & [ ] { } | < >
Confirm new password entry. The appliance will then display a user
message and reboot.
Default =
. Enter a four-digit numeric string that will allow direct
0000
access to the keypad and functions on the appliance front panel.
Enter the same numeric string from above to confirm.
System Configuration
folder on the appliance via FTP
/scripts
button.
See Table 2 below for
See Table 2 for defaults.
13
Advertisement
Table of Contents
