Table of Contents
Advertisement
Program Name
Number of Transmitters 0 – 25. Default = 1.
Number of Servers
Max RTP Packet Size
Shutdown on Video
Input Problem
The Advanced Settings are used to define common session announcement information for
all streams (destinations) associated with a program.
Figure 7. Programs: Part 2 – Advanced Settings
46
Lets you define a descriptive name for the program which is
added to the announcement. This announcement text is displayed
in the Program Guide for other VBrick products. Default =
. Both Program Name and Session Information allow
Program x
special character strings to be inserted automatically into these
fields.
or
– Host Name of VBrick appliance. When the default
\H
\h
entry is used, the program is identified by the default VBrick
Host Name.
0 – 3. Default = 1.
248 – 8000. Default = 1452. For high bit rate and CPU-intensive
configurations, use the default packet size. Note: When streaming
to Quicktime players, a Max RTP Packet Size less than 1000 may
cause audio dropouts. For optimum performance when using an
AmiNET130 Transport Stream, Max RTP Packet Size should not
exceed 1480.
If enabled, this parameter stops streaming when a video input
problem is detected. Default = Disabled.
\H
© 2009 VBrick Systems, Inc.
Advertisement
Table of Contents
