Keysight Technologies N9030B Installation Note page 4

Signal analyzer, option bba analog baseband iq inputs upgrade kit

Hide thumbs Also See for N9030B:

Option BBA, Analog Baseband I/Q Inputs Upgrade Kit

Introduction

This kit provides all parts and instructions necessary to install Option BBA, Analog Baseband I/Q

Input, into the Keysight N9030B with frequency range 26.5 GHz and below.

1. This upgrade kit is not compatible with N9030B PXA signal analyzers with any

2. This upgrade kit installation requires that you re-install instrument software.

3. The option is licensed for one instrument model/serial number combination.

of the following options currently installed:

N9030B-B5X - 510 MHz Analysis Bandwid th

N9030B-544 - Frequency Range, 3 Hz to 44 GHz

N9030B-550 - Frequency Range, 3 Hz to 50 GHz

The latest revision of the PXA Signal Analyzer software may be downloaded

from

http:/www.keysight.com/find/xseries_software

The instrument software must be installed AFTER the hardware in the kit is

installed. Follow the procedure in this document for redeeming and installing

the option upgrade license key.

The license key will only install on the designated instrument.

Installation Note N9030-90077

Table of Contents