Keysight Technologies N9030B Installation Note page 13

Option BBA Hardware Installation
1. Refer to Figure 6. Locate and install the
connector on the right side of the board where the flex ribbon cable will connect.
Figure 6 Option BBA Main Board
2. Locate and install labels N9020-80036, "Remove Both Cables Before Lifting" on the top of
each board extractor, both the right and left hand side.
Installation Note N9030-90077
Option BBA, Analog Baseband I/Q Inputs Upgrade Kit
N9020-60093 BBIQ Main Board into slot 7. Notice the
13