Mounting And Adjustments; Mounting And Timing Of The Knives; Adjusting The Cutting Height - SaMASZ K2BF 210 Operator's Manual

5. MOUNTING AND ADJUSTMENTS

5.1. Mounting and timing of the knives

K2BF 210
Kosiarka dwubębnowa Z 010/8
CAUTION:
The cutting edges of the new knives should be directed towards ground.

5.2. Adjusting the cutting height

The mower has a factory-set cutting height of 58 mm. The cutting height can be adjusted by
removing a distance ring (spacer) as show in Fig. 13. After removing a new cutting height of
50 mm is achieved. By putting one additional spacer over the support saucer a cutting height of
66 mm is obtained. Additional spacers are available (optional extras).
Operator's manual
Kosiarka czterobębnowa Z 007
Fig. 11. Timing of the knives on the mowing saucers
Mounting lever
Klucz specjalny
Knife
N ożyk
Trzym ak nożow y
Talerz ślizgow y
Knife holder Sliding saucer
Fig. 11. Mounting blades
K2BF 210; K4BF 265; K4BF 300
K4BF 265
K4BF 300
Mowing saucer
Talerz roboczy
- 12 -
Front drum mower