Table of Contents
Advertisement
ActiveScale™ X100 Installation Guide
5.3.3 Connect the system to your networks
From the rear of the rack, connect your fiber optic cables to each System Node's SFP+ transceivers as
follows.
Figure 5-51. System Node ports for Public Network 1 and Public Network 2
For racked ActiveScale X100 systems, feed the data center's network cables through the cable routing
brush strip on top of the rack:
Figure 5-52. Network connection through top of rack
Figure 5-53. Cable routing brush strip
Cable Routing
Brush Strip
Rear
52
Advertisement
Table of Contents
