ActiveScale™ X100 Installation Guide
Figure 9-7. Starting a System Expansion Node job
d. Select the system which the new System Expansion Node is attached to, and click Next.
Figure 9-8. Selecting which system the new System Expansion Node is attached to
The System Expansion Node wizard starts. ActiveScale OS disables the DHCP server on the System
Nodes and scans for the new System Expansion Node's link local IP addresses.
– If the wizard indicates that no System Expansion Nodes are available, click Close. Check the
power-on state and cabling of the System Expansion Node and start the wizard again.
– If the wizard finds no problems, click Continue. The wizard displays the network settings.
131