Configure The System Interconnects For Your Chosen Uplink Mode; Create The Required Networks At Each Site; Table 5-35. Parts Needed For Per System, Per Site - Western Digital ActiveScale X100 Installation Manual

ActiveScale™ X100 Installation Guide
specified maximum 10GBASE-SR cable length. For example, do not exceed a length of 400m if you
are using 10G OM4 multi-mode cables.

Table 5-35. Parts needed for per system, per site

System
Uplink mode
configuration
ActiveScale Mode 1 (two individual
X100, base 10G access ports (48,47)
system (one per System Interconnect)
column)
Mode 2 (one 10G trunk
(port 48) per System
Interconnect)
Mode 3 (one 40G trunk
(port 50) per System
Interconnect)
Mode 4 (three 10G trunks
(ports 48,47,46) with
LACP per System
Interconnect)
Mode 5 (two 40G trunks
(ports 50,52) with LACP
per System Interconnect)

5.3.2.2 Configure the System Interconnects for your chosen uplink mode

If you want an uplink mode other than mode 1 (the default), contact Western Digital Support to configure
the System Interconnects on all your systems.
Important: This is an irreversible procedure and must be done by Western
Digital Support before initial bringup (in other words, before running the
configuration wizard).

5.3.2.3 Create the required networks at each site

It is your responsibility to configure your network/WAN, with however many levels of redundancy and/or
physical paths that you need, as long as you implement the following networks at each site:
Transceivers needed, per system, per site
Type Part number
SFP+ Finisar 1EX0272 (there
FTLX8574D3B are 4 in each kit)
CV-iT
SFP+ Finisar 1EX0279 (there
FTLX8574D3B are 2 in each kit)
CV-iT
QSFP+ ASM, 1EX0268 (there
FINISAR 40G is 1 in each kit)
QSFP+ SR
OPTIC,
FTL410QE3C
SFP+ Finisar 1EX0279 (there
FTLX8574D3B are 2 in each kit)
CV-iT
QSFP+ ASM, 1EX0268 (there
FINISAR 40G is 1 in each kit)
QSFP+ SR
OPTIC,
FTL410QE3C
48
Cables needed, per
Quanti
system, per site
ty
1 2 10Gb cables per System
Interconnect (4 cables
total)
1 1 10Gb cable per System
Interconnect (2 cables
total)
2 1 40Gb cable per System
Interconnect (2 cables
total)
3 3 10Gb cables per System
Interconnect (6 cables
total)
2 2 40Gb cables per System
Interconnect (4 cables
total)