Network Requirements; Table 2-31. Pdu Connector Type - Western Digital ActiveScale X100 Installation Manual

ActiveScale™ X100 Installation Guide

Table 2-31. PDU connector type

PDU type Plug standard
Delta Server NEMA L15-
Technology 30P
Delta Server NEMA L21-
Technology 30P
WYE Server IEC 60309 16A
Technology 4P+E
outlet
WYE Server IEC 60309 16A
Technology 3P+E
outlet
Single- Phase NEMA L6-30P L6-30R
Server
Technology
Single- Phase IEC 60309 24A
Server 2P+E
Technology
outlet

2.6 Network requirements

The ActiveScale system provides six 10G Ethernet ports for connecting to a customer's network. However,
the customer must provide six fiber cable drops from the network to the rack. The fiber cable must be LC
to LC multi- mode fiber optic patch cable (LC multi-mode 50/125mm MMF OM3 or OM4 10Gb laser
optimized fiber). These cables must comply with the Ethernet 10GBASE-SR standard. Ensure that you do
not exceed the specified maximum 10GBASE-SR cable length for the cable type chosen. For example, do
not exceed a length of 400 m if you are using 10G OM4 multi-mode cables.
-
Outlet
Frequency
standard
L15-30R 50/60Hz
L21-30R 50/60Hz
IEC 60309 16A 50/60Hz
4P+E
plug
IEC 60309 16A 50/60Hz
4P+E
plug
50/60Hz
IEC 60309 24A 50/60Hz
2P+E
plug
18
Amps (per
Phase
phase)
3-Phase 30A
3-Phase 32A
3-Phase 16A
3-Phase 32A
Single-Phase 24A
Single-Phase 32A
Supply range
200-240V
208V
380-415V
230V
200-240V
220-240V