Upnp - ZyXEL Communications LTE Series User Manual

Table 16 Static DHCP: Configuration
LABEL
Cancel
OK

6.4 UPnP

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between networking devices and software that also have UPnP
enabled. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities
and learn about other devices on the network. A device can leave a network smoothly and
automatically when it is no longer in use.
See Section 6.6 on page 52
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 32 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 17 Network Settings > Home Networking > UPnP
LABEL
UPnP State
UPnP
UPnP NAT-T State
Chapter 6 Home Networking
DESCRIPTION
Click Cancel to exit this screen without saving any changes.
Click OK to save your changes.
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the Web Configurator's login screen without entering the Zyxel Device's IP address (although
you must still enter the password to access the Web Configurator).
LTE Series User's Guide
50