Note: Use the WiFi function of the Zyxel Device for configuration (for example, connect to the
LTE Ally app of your mobile device to find the optimal LTE signal strength and manage
your Zyxel Device).
1.7 The RESET Button
If you forget your password or cannot access the Web Configurator, you will need to use the RESET
button of the Zyxel Device as shown in the following figure to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password will be
reset to the default password shown on the device label and the IP address will be reset to 192.168.1.1.
Figure 4 Reset Button
Make sure the Zyxel Device is connected to power and POWER LED is on.
1
To set the Zyxel Device back to the factory default settings, press the RESET button for 5 seconds.
2
Note: If you press the RESET button for more than 2 seconds but less than 5 seconds, it will
cause the system to reboot.
Chapter 1 Introduction
LTE Series User's Guide
16