E-Mail Notification Edit - ZyXEL Communications LTE Series User Manual

Table 63 Maintenance > E-mail Notification (continued)
LABEL
E-mail Address
Remove

22.2.1 E-mail Notification Edit

Click the Add button in the E-mail Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 104 E-mail Notification > Add
The following table describes the labels in this screen.
Table 64 E-mail Notification > Add
LABEL
Mail Server
Address
Port
Authentication
User name
Authentication
Password
Account e-mail
Address
Chapter 22 E-mail Notification
DESCRIPTION
This field displays the e-mail address that you want to be in the from/sender line of the e-mail
that the Zyxel Device sends.
Click this button to delete the entry.
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail address specified in the
Account e-mail Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Enter the same port number here as is on the mail server for mail traffic.
Enter the user name (up to 32 characters). This is usually the user name of a mail account you
specified in the Account e-mail Address field.
Enter the password associated with the user name above.
Enter the e-mail address that you want to be in the from/sender line of the e-mail notification
that the Zyxel Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated by
the mail server as well.
LTE Series User's Guide
137