Cellular Band Configuration - ZyXEL Communications LTE Series User Manual

The following table describes the fields in this screen.
Table 9 Network Setting > Broadband > Cellular SIM
LABEL
PIN Management
PIN Protection
PIN
Attempts
Remaining
Cancel
Apply

5.4 Cellular Band Configuration

Either select Auto to have the Zyxel Device connect to an available network using the default settings
on the SIM card or select the type of the network (4G, 3G, or 2G) to which you want the Zyxel Device to
connect.
Click Network Setting > Broadband > Cellular Band. The following screen opens.
Figure 23 Network Setting > Broadband > Cellular Band
Chapter 5 Broadband
DESCRIPTION
A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN code, you
cannot use the SIM card.
Click to enable ( ) if the service provider requires you to enter a PIN to use the SIM card.
Click to disable if the service provider lets you use the SIM without inputting a PIN.
If you enabled PIN verification, enter the 4-digit PIN code (0000 for example) provided by your ISP.
If you enter the PIN code incorrectly too many times, the ISP may block your SIM card and not let
you use the account to access the Internet.
This is how many more times you can try to enter the PIN code before the ISP blocks your SIM card.
Click Cancel to return to the previous screen without saving any changes.
Click Apply to save your changes.
LTE Series User's Guide
38