User Account Add/Edit - ZyXEL Communications LTE Series User Manual

Table 56 Maintenance > User Account (continued)
LABEL
Lock Period
Group
Modify
Cancel
Apply

19.2.1 User Account Add/Edit

Add or change the name of the user account, set the security password and the retry times, and
whether this user will have Administrator or User privileges. Click Add New Account or the Edit icon of an
existing account in the Maintenance > User Account to open the following screen.
Figure 97 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 57 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Password
Verify Password
Chapter 19 User Account
DESCRIPTION
This field displays the length of time a user must wait before attempting to log in again after a
number of consecutive wrong passwords have been entered as defined in Retry Times.
This field displays whether this user has Administrator or User privileges.
Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
DESCRIPTION
Click to enable (switch turns blue) or disable (switch turns gray) to activate or deactivate the
user account.
Enter a new name for the account (up to 15 characters). Special characters are allowed except
the following: double quote (") back quote (`) apostrophe or single quote (') less than (<) greater
than (>) caret or circumflex accent (^) dollar sign ($) vertical bar (|) ampersand (&) semicolon
(;)
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the Zyxel Device.
Type the new password again for confirmation.
LTE Series User's Guide
127