Upnp - ZyXEL Communications VMG Series User Manual

Table 61 Network Setting > Home Networking > Static DHCP: Static DHCP Configuration (continued)
LABEL
IP Address
OK
Cancel

10.4 UPnP

Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See Section 10.10 on page 259
Note: To use UPnP NAT-T, enable NAT in the Network Setting > Broadband > Edit or Add New
WAN Interface screen.
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 126 Network Setting > Home Networking > UPnP
Chapter 10 Home Networking
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select Manual Input in the previous field.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
VMG/EMG/AM/DM/GM Series User's Guide
252