Table of Contents
Advertisement
Chapter 4 Using the On-Screen Display Interface
Available Settings and Options
This section describes the functions and options of each item on the SETUP page. See
Settings
on
page 2 3
Field
Options/values
Scan Mode All, or PC ON
Scan Time 5 to 255 seconds
(at an interval of 5
seconds)
ID Display
5 to 25 seconds, or
ALL
Position
Menu, or ID
Hotkey
Scroll Lock, Caps
Lock, or Num Lock
Buzzer
ON or OFF
Audio
ON or OFF
24
.
Function
This determines which servers will be scanned after
activating the channel scan function. See
on
This determines how long each channel's video is
displayed during the channel scan.
This determines how long each channel's ID appears
onscreen after selecting any channel. See
page 1 8
Select Menu or ID in order to adjust its position on the
screen.
For instructions, see
2 5
This determines the hot key used for:
Turn the buzzer of the 1754-A1T KVM switch on or off.
Turn on or off the audio support.
page 2 7
.
All: All channels are scanned.
PC ON: Only active channels are scanned. See
Active and Inactive Channels
.
Menu: Main OSD pages, such as Selection Menu
and the login screen.
ID: Channel ID.
Adjusting the OSD Position
.
Triggering the OSD.
Selecting a channel when the OSD is not shown.
ON: Turn on the audio. This is the default.
OFF: Mute the audio.
System
Channel Scan
on
page 33
.
Channel ID
on
on
page
Advertisement
Table of Contents
