Chapter 4 Using the On-Screen Display Interface
Video Adjustment
You can adjust the following video properties of the channel that is being accessed.
Brightness
•
Contrast
•
Adjusting a video channel
1. Select the desired channel to have its video shown on the screen. See
on
page 1 3
.
2. Press the hot key twice, then the letter "c" and finally press Enter. With the default hot
key "Scroll Lock", you should press:
Scroll Lock > Scroll Lock > C > Enter
3. The following video properties appear on-screen.
4. Press
or
: Brightness
: Contrast
5. Press
or
property.
6. Press Esc to save the changes and exit.
28
to select the video brightness or contrast.
to adjust the value after the cursor is located in the desired video
Accessing a Server