Chapter 2 ThinkSystem Analog 1x8 KVM Switch
Rear View
1
Power socket and
power switch
2
'Console' 1 connectors Connect the data input/output devices. For details, refer to a, b
a
b
c
3
Reset button
4
Firmware upgrade
connector
5
Channel ports
Power socket: Connect the power cord.
Power switch: Turn the power on or off.
2 and c listed below.
Two USB-A ports at USB 2.0
speed
Connect audio input devices, such as speakers or headphone.
Connect a monitor.
If your monitor does not have a DVI connector, an appropriate
video converter or adapter is required.
Power cycles the 1754-A1T switch.
Note that users are forced to log out on reset.
Connect a Windows based computer for upgrading the 1754-
A1T switch's
firmware.
Connect servers.
Connect a USB keyboard and
mouse.
5